|
ClearWater Chlorine Granules |
| 1kg |
|
£9.99 | |
| 5kg |
|
£39.99 |
ClearWater Chlorine Granules Description
ClearWater branded chlorine granules. Container of chlorine granules for helping keep your spa and pool water maintained. Available in 2 sizes.
Dimensions:
1kg: H 203mm Ø 100mm
5kg: H 285mm W 180mm D 130mmApplication Instructions:
1. Maintain pH level within the ideal range 7.2 – 7.6. If the level is not in this range adjust.
2. Maintain free chlorine residuals within the range POOLS 1 – 3 mg/lt (ppm); SPAS 3 – 5 mg/lt (ppm). * Freshly filled spas require an initial shock or start up dose of 50 mg/lt (ppm) for 1 hour or 20mg/lt (ppm) for 2 hours.
3. This product may be applied directly to pools and spas where temperatures exceed 20ºC. If below this temperature or in doubt pre-dissolve this product in a clean plastic container at a maximum rate of 100 g of product per 2.2 gallons (10 litres) in water. Stir well to ensure product is fully dissolved.Add the resulting solution to the pool or spa whilst the pump(s) are turned “on” preferably near the water inlets to aid distribution.
4. Repeat dose/application if necessary to achieve levels in point 2 above.
5. It is recommended you periodically (e.g.weekly/fortnightly) use a double dose to eliminate any excess contamination.
General Precautions:
Dosing:
• Wear eye and face protection and ensure granules are not blown back into your face.
• Never mix with other chemicals including household cleaners or a dangerous
reaction may occur.
• When pre-dissolving always add product to water and not vice verse.
Handling / Storage (Important – see Risk and Safety phrases opposite)
• Handle products in a well-ventilated area, preferably outdoors.
• Wash hands after use.
• Ensure chemicals do not become damp in storage - store in a cool dry place.
Dedicated Chemical Helpline: 0871 222 9084
Dimensions:
1kg: H 203mm Ø 100mm
5kg: H 285mm W 180mm D 130mmApplication Instructions:
1. Maintain pH level within the ideal range 7.2 – 7.6. If the level is not in this range adjust.
2. Maintain free chlorine residuals within the range POOLS 1 – 3 mg/lt (ppm); SPAS 3 – 5 mg/lt (ppm). * Freshly filled spas require an initial shock or start up dose of 50 mg/lt (ppm) for 1 hour or 20mg/lt (ppm) for 2 hours.
3. This product may be applied directly to pools and spas where temperatures exceed 20ºC. If below this temperature or in doubt pre-dissolve this product in a clean plastic container at a maximum rate of 100 g of product per 2.2 gallons (10 litres) in water. Stir well to ensure product is fully dissolved.Add the resulting solution to the pool or spa whilst the pump(s) are turned “on” preferably near the water inlets to aid distribution.
4. Repeat dose/application if necessary to achieve levels in point 2 above.
5. It is recommended you periodically (e.g.weekly/fortnightly) use a double dose to eliminate any excess contamination.
| Water volumes | To increase chlorine level by | ||
| Litres | Gallons | 1ppm | 3ppm |
| 1,000 | 220 | 2g | 6g |
| 4,545 | 1,000g | 9g | 27g |
| 22,700 | 5,000 | 45g | 135g |
General Precautions:
Dosing:
• Wear eye and face protection and ensure granules are not blown back into your face.
• Never mix with other chemicals including household cleaners or a dangerous
reaction may occur.
• When pre-dissolving always add product to water and not vice verse.
Handling / Storage (Important – see Risk and Safety phrases opposite)
• Handle products in a well-ventilated area, preferably outdoors.
• Wash hands after use.
• Ensure chemicals do not become damp in storage - store in a cool dry place.
Dedicated Chemical Helpline: 0871 222 9084
| Product reviews |
|
There are currently no reviews for this product, be the first. |
| Some comments from our customers |
|
Great service highly recommended, goods as described, ultra quick delivery. James Gilmour - Bathgate, Scotland Great service, speedy delivery. Thanks! Philippa Batty - Suffolk Well packaged and fast delivery, recommended! Jon Dewsnap - York, North Yorkshire |




